§ Rutherford County · 16 mi from Murfreesboro
Foundation repair in Milton, TN
Milton is a small, older community in the northeast corner of Rutherford County. Most homes here are rural and many are decades old.
Last updated
An old community on Lascassas Pike
Milton was established in 1820 by Gideon Thompson and was once an incorporated town. It sits along State Route 96, Lascassas Pike, between Auburntown and Murfreesboro. The ZIP code is small, about 1,100 people in the latest Census estimate, and its housing is older than most of the county. More than half of homes in 37118 were built before 1980, and the median build year is 1978.
For a rural house of that age, the foundation questions are usually about the crawl space. Block or stone piers settle and lean. Sill plates rot where they meet masonry. Floor joists sag where someone cut through them for plumbing decades ago. Those problems tend to show up slowly, as a floor that feels soft near a bathroom or a bedroom door that no longer latches.
Milton at a glance
- Drive from Murfreesboro
- About 16 miles northeast on SR 96
- County
- Rutherford
- Population (ZIP 37118, ACS 2024)
- 1,094
- Median year homes built
- 1978
- Homes built before 1980
- About 53%
- Owner occupied
- 87%
- Mapped soil at community center
- Lomond silt loam, deep and well drained
Drive distance: OpenStreetMap routing from central Murfreesboro. Housing figures for ZIP code 37118: U.S. Census Bureau, ACS 2024 5-year estimates (via Census Reporter). Soil: USDA NRCS Soil Data Access, map unit at the community's center point. Soil maps describe typical conditions, not your lot. History: Wikipedia, Milton, Tennessee.
Free inspection
Seeing any of this in Milton?
Tell us what you see. One licensed local contractor will come and look, free.
Better ground than most
The soil mapped at Milton's center is Lomond silt loam. It is deep, well drained and moderate on shrink-swell, and the survey does not reach rock in its normal depth. That is kinder ground than the thin glade soils around La Vergne. It means many Milton houses with problems have them because of age, water or old repairs, not because the ground itself is unstable.
Because of that, a good contractor visit here should include a real look under the house: moisture readings in the wood, a check of every pier, and a look at how water drains around the outside. Be wary of a quote for a dozen exterior piers on a crawl space home without any explanation of what is happening underneath.
Getting someone out this far
Milton is about 16 miles from central Murfreesboro. Most area crews cover it, and we will match you with one that does. Rutherford County's home improvement license applies here for residential jobs from $3,000 to $24,999, and you can check a company's status at verify.tn.gov.
Getting ready for an inspection in Milton
Milton is about 16 miles from central Murfreesboro. Ask whether the contractor works this far out often and whether the inspection is still free at that distance. With a median build year of 1978, many homes here are old enough to sit on crawl spaces with block or stone piers. Tell the contractor whether yours has foundation vents, a crawl space door or a basement.
USDA soil maps show Lomond silt loam, deep and well drained at the center of Milton. Soil maps describe typical ground, not your lot, so ask whether the contractor wants a soil test or an engineer's report before quoting piers. Because this is Rutherford County, ask for the contractor's home improvement license number on any job from $3,000 to $24,999.
Repairs we can connect Milton homeowners with
National cost ranges from Angi, 2026. See the cost guide for detail.
- 01Foundation repairDiagnosis and repair for settling, cracking or shifting foundations.Most pay $2,225 to $8,133
- 02Pier and helical pier repairSteel push piers and helical piers that carry the house on firmer ground.$1,000 to $3,000 per pier
- 03Slab foundation repairFixes for sinking, cracked or heaving concrete slabs.Slab jacking $500 to $1,300
- 04House levelingLeveling sagging floors and out-of-level crawl space homes.Reshimming $1,200 to $4,000
- 05Crawl space structural repairRotted sills, sagging joists, failing piers and damp crawl spaces.New piers $800 to $4,000
- 06Basement wall repairBowing, leaning or cracked basement and block walls.Basement repair $2,300 to $7,600
- 07Foundation crack repairSealing and structural repair for foundation and wall cracks.Cracks $250 to $800
- 08Foundation inspection and estimatesOn-site evaluations, written estimates and engineer reports.Engineer report $300 to $1,000
§ FAQ
Milton foundation questions
My Milton house has a soft spot in the floor. Is that the foundation?
Usually it is the floor framing or subfloor, often from a past leak. A contractor who does crawl space repair can check the joists, sill and piers and tell you. About 53% of homes in ZIP code 37118 were built before 1980, so many sit on crawl spaces where sills and joists soften over time.
Is the soil in Milton bad for foundations?
Not especially. The mapped soil at the community center is Lomond silt loam, which is deep and well drained. Age and moisture cause most of the issues here, since the median home in ZIP code 37118 was built in 1978. Keep downspouts and grading moving water away from the house, and check the crawl space.
Free inspection request
Get a licensed contractor out to Milton
Fill this in and we will pass it to one independent, licensed contractor who covers your town. They will call to set up a free visit. You do not have to hire them.
Tennessee requires a home improvement license for residential jobs from $3,000 to $24,999 in Rutherford County, and a contractor license for jobs of $25,000 or more anywhere in the state. Ask any contractor for their license number and check it at verify.tn.gov.
About this guide
Written by the Murfreesboro Foundation Repairs editorial team. The facts on this site come from the sources linked next to them: the U.S. Geological Survey, USDA soil surveys, Census Bureau estimates, Angi's 2026 cost guides and the Tennessee contractor licensing board. Have a licensed contractor or engineer inspect your home before you decide on a repair.
Last updated